PRODUCT GEOMETRY / SAWING±0.05 mm / runout 0.02 mm
SAWLaser-welded or brazed segments
±0.05 mm / runout 0.02 mmtolerance
10 pcsMOQ
Diamond saw bladesDiamond saw blades
Superhard tooling · Diamond saw blades
Diamond saw blades
Controlled cutting of aluminium, composites and hard facing without heat damage.
WorkpieceAluminium, CFRP, GFRP, stone, hard facing
OperationCircular sawing, cut-off, grooving
Tolerance±0.05 mm / runout 0.02 mm
Edge preparationLaser-welded or brazed segments
Send a drawing or a sample part. We will confirm grade, edge and price.
Technical data
| Workpiece | Aluminium, CFRP, GFRP, stone, hard facing |
|---|---|
| Operation | Circular sawing, cut-off, grooving |
| Tolerance | ±0.05 mm / runout 0.02 mm |
| Edge preparation | Laser-welded or brazed segments |
| MOQ | 10 pcs |
| Lead time | 3–4 weeks |
Grade
| Grade | Grain / composition | Hardness | Binder | Density | Transverse rupture strength | Max. service temperature | Best for |
|---|---|---|---|---|---|---|---|
| OK-SB A | Diamond 40–80 grit | Laser-welded | — | — | — | 600 °C | Aluminium, copper |
| OK-SB C | Diamond 60–120 grit | Brazed | — | — | — | 500 °C | CFRP, GFRP, composites |
| OK-SB S | Diamond 30–60 grit | Laser-welded | — | — | — | 700 °C | Stone, hard facing |
Typical values. Final grade, geometry and cutting data are confirmed against the drawing and workpiece.
Engineering detail
- Segment bond and diamond grit matched to the material and saw power.
- Laser-welded or brazed construction for different safety and life targets.
- Noise-reducing slots and tensioning available for thin kerf.
- Custom diameters, bores and tooth counts from drawing.
Frequently asked questions
What workpieces can this tool handle?
Workpieces: Aluminium, CFRP, GFRP, stone, hard facing. Recommended operations: Circular sawing, cut-off, grooving.
What is the MOQ and lead time?
Standard MOQ is 10 pcs; typical lead time is 3–4 weeks. Trial quantities are evaluated case by case.
How are tolerance and edge controlled?
Typical tolerance: ±0.05 mm / runout 0.02 mm. Edge preparation: Laser-welded or brazed segments. Final values are confirmed against the drawing and workpiece.
Can it be manufactured to a drawing?
Yes. Send PDF, STEP, DWG or DXF. We review geometry, edge access, coolant and tool life before quoting.