Superhard tooling · exporting to 48 markets
TECHNICAL NOTE

A starting point for PCD and PCBN cutting data

Speed, feed and depth-of-cut windows to validate on your machine — not a catalogue guarantee.

Start conservative and change one variable at a time. For PCD in aluminium, a typical finishing window is 300–800 m/min, 0.05–0.20 mm/rev and 0.2–1.0 mm depth of cut. For PCBN in 60 HRC steel, start around 120–220 m/min, 0.05–0.15 mm/rev and 0.1–0.4 mm depth of cut.

These are starting points. Machine rigidity, coolant, tool overhang, workpiece hardness and interruption decide the final values. Record the first 20 parts and adjust speed before feed if the edge is wearing too quickly.

What to send us

Workpiece material and hardness, machine, tool holder, operation, current cycle time and failure mode. We will return a specific starting window and a test plan.