Superhard tooling · exporting to 48 markets
TECHNICAL NOTE

PCD vs PCBN: choose by workpiece, not by hardness alone

A practical decision table for aluminium, composites, hardened steel and cast iron.

PCD is diamond in a cobalt or ceramic matrix. It is the default for aluminium, copper, CFRP and other non-ferrous or non-metallic workpieces because diamond does not react with them and resists abrasion extremely well.

PCBN is cubic boron nitride in a ceramic matrix. It is the correct choice for hardened steel, cast iron and powder metal because CBN is thermally stable in contact with iron at cutting temperatures. Diamond would graphitise or react with iron.

Quick selection

WorkpieceFirst choiceReason
Aluminium, copper, brassPCDNo iron affinity; sharp edge and low friction
CFRP / GFRPPCDAbrasion resistance and clean shear
Hardened steel 45–65 HRCPCBNThermal stability with iron
Cast iron / powder metalPCBNWear resistance in interrupted cuts

If the operation is a hybrid stack, specify the tool around the most difficult interface and confirm the cutting data with a first-article test.