
PRODUCT GEOMETRY / DRILLINGH7–H8
DRILLPCD tip brazed or full-head
H7–H8tolerance
5 pcsMOQ
Drilling & reamingPCD drills & reamers
Superhard tooling · Drilling & reaming
PCD drills & reamers
Hole quality and tool life in abrasive aluminium and composite stacks.
WorkpieceAluminium, CFRP, GFRP, copper, MMC
OperationDrilling, reaming, countersinking, step drilling
ToleranceH7–H8
Edge preparationPCD tip brazed or full-head
Send a drawing or a sample part. We will confirm grade, edge and price.
Technical data
| Workpiece | Aluminium, CFRP, GFRP, copper, MMC |
|---|---|
| Operation | Drilling, reaming, countersinking, step drilling |
| Tolerance | H7–H8 |
| Edge preparation | PCD tip brazed or full-head |
| MOQ | 5 pcs |
| Lead time | 2–3 weeks |
Grade
| Grade | Grain / composition | Hardness | Binder | Density | Transverse rupture strength | Max. service temperature | Best for |
|---|---|---|---|---|---|---|---|
| OK-DR 10 | 10 µm PCD | 8,500 HV | Cobalt | 4.05 g/cm³ | 1,350 MPa | 700 °C | Aluminium, copper |
| OK-DR 25 | 25 µm PCD | 9,200 HV | Cobalt | 4.10 g/cm³ | 1,250 MPa | 700 °C | CFRP, GFRP, MMC |
| OK-DR H | H6 / H7 reamer | 8,800 HV | Cobalt | 4.05 g/cm³ | 1,300 MPa | 700 °C | Precision holes |
Typical values. Final grade, geometry and cutting data are confirmed against the drawing and workpiece.
Engineering detail
- PCD cutting head for low friction and built-up-edge resistance.
- Coolant channels and point geometry adapted to the stack and machine.
- Diamond reamers for H6/H7 hole tolerance and low Ra.
- First-article dimensional report on request.
Frequently asked questions
What workpieces can this tool handle?
Workpieces: Aluminium, CFRP, GFRP, copper, MMC. Recommended operations: Drilling, reaming, countersinking, step drilling.
What is the MOQ and lead time?
Standard MOQ is 5 pcs; typical lead time is 2–3 weeks. Trial quantities are evaluated case by case.
How are tolerance and edge controlled?
Typical tolerance: H7–H8. Edge preparation: PCD tip brazed or full-head. Final values are confirmed against the drawing and workpiece.
Can it be manufactured to a drawing?
Yes. Send PDF, STEP, DWG or DXF. We review geometry, edge access, coolant and tool life before quoting.

