
PCD inserts
Superhard tooling · PCD inserts
PCD turning inserts
Mirror finishes in aluminium, copper and metal-matrix composites — at production speeds.
WorkpieceAluminium, copper, brass, MMC, CFRP
OperationTurning, facing, boring, grooving
Tolerance±0.005 mm
Edge preparationLaser-cut, honed R0.02–R0.10
Send a drawing or a sample part. We will confirm grade, edge and price.
Technical data
| Workpiece | Aluminium, copper, brass, MMC, CFRP |
|---|---|
| Operation | Turning, facing, boring, grooving |
| Tolerance | ±0.005 mm |
| Edge preparation | Laser-cut, honed R0.02–R0.10 |
| MOQ | 10 pcs |
| Lead time | 2–3 weeks |
Grade
| Grade | Grain / composition | Hardness | Binder | Density | Transverse rupture strength | Max. service temperature | Best for |
|---|---|---|---|---|---|---|---|
| OK-PCD 10 | 10 µm / Co | 8,500 HV | Cobalt | 4.05 g/cm³ | 1,350 MPa | 700 °C | Aluminium alloys, copper |
| OK-PCD 25 | 25 µm / Co | 9,200 HV | Cobalt | 4.10 g/cm³ | 1,250 MPa | 700 °C | MMC, CFRP, abrasive polymers |
| OK-PCD 05 | 5 µm / Co | 8,000 HV | Cobalt | 4.00 g/cm³ | 1,450 MPa | 700 °C | Mirror finishing, copper |
Typical values. Final grade, geometry and cutting data are confirmed against the drawing and workpiece.
Engineering detail
- Cobalt-bonded PCD with consistent grain distribution for predictable flank wear.
- Laser-cut edge and controlled honing reduce micro-chipping on interrupted cuts.
- Available in ISO turning geometries, full-face and brazed-tip designs.
- Recommended cutting data supplied for your alloy and machine.
Frequently asked questions
What workpieces can this tool handle?
Workpieces: Aluminium, copper, brass, MMC, CFRP. Recommended operations: Turning, facing, boring, grooving.
What is the MOQ and lead time?
Standard MOQ is 10 pcs; typical lead time is 2–3 weeks. Trial quantities are evaluated case by case.
How are tolerance and edge controlled?
Typical tolerance: ±0.005 mm. Edge preparation: Laser-cut, honed R0.02–R0.10. Final values are confirmed against the drawing and workpiece.
Can it be manufactured to a drawing?
Yes. Send PDF, STEP, DWG or DXF. We review geometry, edge access, coolant and tool life before quoting.
