PCBN inserts for hardened steel. Hold ±0.005 mm.
Hard turning, boring and interrupted cuts on 45–65 HRC. Send a drawing; get grade, edge and price in 24 hours.
ISO 9001 · CMM report with every first article · batch traceability
62 HRC. 180 m/min. One edge, 2,400 parts.
A hardened D2 die insert was ground in two operations. PCBN 70 with a wiper edge replaced the finish grind, held ±0.005 mm and removed the second setup.
See the PCBN grade range →- Workpiece
- D2 / 1.2379
- Hardness
- 62 HRC
- Speed
- 180 m/min
- Feed
- 0.10 mm/rev
- Tolerance
- ±0.005 mm
- Tool life
- 2,400 pcs
Test conditions: D2 / 1.2379, 62 HRC, CNC lathe, flood coolant, wiper edge. Representative data — prove out on your machine.
Five families. One grade logic.
PCD, PCBN, diamond/CBN grinding, PCD drilling and diamond cutting — selected by workpiece and operation, not by catalogue page.

PCD inserts
Polycrystalline diamond for non-ferrous and composites

PCBN inserts
Hard turning of hardened steel and cast iron

Diamond & CBN grinding
Wheels, pins and dressing tools for hard materials

Drilling & reaming
PCD drills, reamers and step tools

Diamond saw blades
Cutting discs for metal, composite and stone

Custom & MCD
Drawing-led tools and mirror-finish MCD
Grade and application matrix.
Start with hardness and interruption. The grade follows the failure mode, not the price.
Three inputs. One starting grade.
| Grade | CBN | Hardness | Application |
|---|---|---|---|
| OK-PCBN 50 | 50% CBN / TiN | 3,200 HV | Hardened steel, continuous cut |
| OK-PCBN 70 | 70% CBN / TiAlN | 3,800 HV | Interrupted cuts, powder metal |
| OK-PCBN 90 | 90% CBN / Al | 4,300 HV | High-hardness white cast iron |
Typical values. Final grade is confirmed by workpiece, drawing and machine.
Full PCBN data →Material → grade
Not a substitute for a test cut. Send the drawing and target life.
Request a grade recommendation →
Every batch leaves a record.
Every shipment can be traced to the blank batch, edge process and final inspection. Certificates and dimensional reports are issued with the packing list.
- CMM dimensional report with every first article
- Batch card: powder lot → sinter → edge → inspection
- ISO 9001:2015 / ISO 14001:2015
- IATF 16949 and PPAP support on request
Go deeper before the RFQ.
PCD vs PCBN: choose by workpiece, not by hardness alone
A practical decision table for aluminium, composites, hardened steel and cast iron.
Read more →EDEdge preparation: the 0.02 mm that decides tool life
Why a polished edge is not always better, and how to specify hone size for interrupted cuts.
Read more →CUA starting point for PCD and PCBN cutting data
Speed, feed and depth-of-cut windows to validate on your machine — not a catalogue guarantee.
Read more →Send the drawing. We will return grade, edge and price.
PDF, STEP, DWG or DXF. A problem part is enough to start.